• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However If you have double glazed window repairs-pane windows that are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from getting into your property until a professional is able to repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it could also be due to the handle mechanism getting worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The corner joints of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. Windows that leak water do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them and that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal than the frame. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it blows open with an ease. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to replace a hinge on a window however it is easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

The issue could be caused either by opening the window incorrectly or a faulty installation at the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges can also be unbalanced due to wear, which can cause a gap where the sash meets frame. This can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. The interlock may also become misaligned. It is located on the hinge's side, and could require to be cleaned. In some cases, it may be necessary to replace these.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the upvc window repair near me window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the risk of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the top of your windowsill. They will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it may be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.