• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

Upvc window repair windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards will fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you might think about the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a variety of issues such as sagging. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you aren't able to move the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. The first step is to close your window and do an initial test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if awake each day to discover mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in the breeze. These are easily repaired by any skilled DIYer and can be done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is essentially a very simple process but it can be easier when you have a person to help hold the frame up.

It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to provide suggestions.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. The hinges may also become misaligned due to wear, creating a gap between the frame and sash. This can be easily fixed by giving them a thorough clean, however if they are beyond repair it could be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The seals may wear out or get damaged over time, allowing air escape. Installing high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. It is essential to remember that all windows eventually become worn out, and it is more cost-effective to replace them than to repair them. If you have any problems with your Upvc window it is recommended to speak with a professional as soon as you can.